Spackle, Wood & Wall Patching | Paint Outlets – Benjamin Moore Paints at PaintOutlets.com

Start a new chat?

Sign inContinue without signing in

Email me with news and offers

Shop

By continuing, Shop will share your email, name, and avatar with Benjamin Moore Paints at PaintOutlets.com. See their terms and privacy policy.

Account

Cart

Patching & Repair

30 products

Ready today

Ships nationwide

Filter & sort Sort:FeaturedMost relevantBest sellingAlphabetically, A-ZAlphabetically, Z-APrice, low to highPrice, high to lowDate, old to newDate, new to old30 products

Showing

16 of 30 products

Bondo

4.9(312)

Bondo Glazing and Spot Putty 4.5 oz

$7.21 ~~$8.99~~

In stock & ready today

Add to cart

Color Putty

5.0

Color Putty Oil Based Wood Filler 3.68 OZ.

$5.99

In stock & ready today

Choose options

Crawford's

5.0

Crawford's- Painters Putty Interior/Exterior- Half Pint

$13.49 ~~$14.99~~

In stock & ready today

Add to cart

Crawford's

4.9(312)

Crawford's- Painters Putty Interior/Exterior- Qt

$25.19 ~~$29.99~~

In stock & ready today

Add to cart

Crawford's

5.0

Crawford's- Vinyl Spackling Paste Interior/Exterior- Qt

$22.49 ~~$24.99~~

In stock & ready today

Add to cart

Dap

5.0

DryDex® Dry Time Indicator Spackling Interior/Exterior -QT

$9.99

In stock & ready today

Add to cart

Dap

5.0

DryDex® Dry Time Indicator Spackling Interior/Exterior- Half Pint

$4.99

In stock & ready today

Add to cart

ALLPRO

5.0

Drywall Patch - Self Adhesive 4x4

$4.80 ~~$5.99~~

In stock & ready today

Add to cart

ALLPRO

4.9(312)

Drywall Patch - Self Adhesive 6x6

$4.89 ~~$6.00~~

In stock & ready today

Add to cart

ALLPRO

4.9(312)

Fiberglass Joint Tape- 2" x 150"

$4.80 ~~$5.99~~

In stock & ready today

Add to cart

ALLPRO

4.9(312)

Fiberglass Joint Tape- 2" x 50"

$4.49 ~~$4.99~~

In stock & ready today

Add to cart

Abatron

4.9(312)

LiquidWood Restoration Kit

$45.65 ~~$57.99~~

In stock & ready today

Add to cart

Not sure of the color? Try it first.

8oz liquid samples in any color — only $5.99 eggshell sheen only

Shop color samples Shop color fan decks

Marshalltown

5.0

Marshalltown Blue Steel Taping Knife 10 in. L

$8.99

In stock & ready today

Add to cart

Marshalltown

4.9(312)

Marshalltown Blue Steel Taping Knife 12 in. L

$8.99

In stock & ready today

Add to cart

Marshalltown

5.0

Marshalltown Blue Steel Taping Knife 8 in. L

$8.99

In stock & ready today

Add to cart

Warner

4.9(312)

Mud Pan 12"- Metal

$17.99 ~~$19.99~~

In stock & ready today

Add to cart

Load more products

Good to know

What Is Spackle, and What Is It Used For?

Learn moreLearn less

Spackle is a ready mixed paste used to fill holes, cracks, dents, and surface imperfections in drywall, plaster, and wood before painting.

The most common use is patching nail holes, anchor holes, and small dents so a wall looks smooth once you roll new paint over it. Specialty formulas handle bigger jobs, exterior surfaces, and wood filling too. For outdoor repairs, you will want to pair interior/exterior rated spackle with an exterior paint that can actually take weather, since spackle alone is not weatherproof.

The word itself has a specific origin. "Spackle" was patented in 1928 by the Muralo Company of Bayonne, New Jersey, and it started life as a dry powder mixed with water. The trademark has passed through a few hands since then and is now held by ICP Construction, but the name was genericized a long time ago. Today it describes any lightweight wall repair paste regardless of brand.

Worth knowing: spackle is not the same as joint compound (drywall mud). Joint compound is designed for taping seams and skim coating large areas, while spackle is formulated for spot repairs. Spackle dries faster, shrinks less, and sands smoother on small patches, which is why every professional painter keeps a tub on the truck.

Best Spackle Products for Interior Wall Repair

For everyday interior wall repair (nail holes, anchor pulls, furniture dings), lightweight spackling is the category to start with.

Lightweight formulas are made with hollow glass microspheres or expanded perlite, so they do not slump in deeper holes and do not shrink as they dry. The contractor favorites on this shelf include:

DAP Fast'N Final Lightweight Spackling- patch, prime, and paint in one step with no sanding required
DAP DryDex- the color changing formula that goes on pink and dries white so you know when to sand.
Crawfords- painter’s putty and spackling paste designed to deliver exceptional performance, flawless finishes, and long-lasting results—so every repair is a job well done.
MH Ready Patch - is a great interior/exterior heavy-duty, spackling and patching compound designed to combine the ease of spackle with the strength of plaster.

Best Type of Spackle for Drywall Repair

The right product depends on the size of the damage.

For nail holes and dings under a quarter inch, any lightweight spackle for drywall will do the job. Medium holes between a quarter inch and one inch call for a heavyweight or vinyl based spackling compound, which has more body and will not sag as it dries. For large holes over an inch across, pair a self adhesive mesh patch with spackle or joint compound.

For hairline cracks, especially the stress cracks that reappear above doors and windows, reach for DAP Alex Flex Flexible Spackling. It is formulated with elastomeric polymers that flex with the wall, so the crack does not reopen.

For plaster walls in older Michigan homes, a patching plaster or heavyweight spackle holds up better than standard drywall formulas. And if you are patching a concrete garage floor or a worn porch surface, skip the drywall spackle entirely and shop our floor paint collection for concrete patch and epoxy fillers built for foot traffic.

Top Rated Spackle Brands for Quick Drying

If you are painting the same day, dry time matters. Most standard spackling paste takes one to five hours depending on depth and humidity, so the fastest formulas are worth the small premium.

DAP Fast'N Final is the category leader here. It is paintable with latex in about 30 minutes for shallow fills and technically fully cures in two to four hours.

DAP Fast Dry Premium Spackling is a heavier bodied option for slightly larger fills, and Crawfords smooth, ready-to-use formulas spread and feather easily—making repairs quick and hassle-free for pros and DIYers..

A practical note: dry times get longer on deeper fills and in high humidity. If you are spackling a full room in a damp Michigan summer, build in extra time or run a fan in the space.

How to Apply Spackle for Small Holes and Drywall Holes

Application is straightforward. A clean finish comes down to prep and patience more than technique.

Small holes and nail pops

Lightly sand the area around the hole to knock down any raised paper or paint. Scoop spackle onto a one and a half or two inch putty knife, press it into the hole at a slight angle, then drag the knife flush with the wall to skim off the excess.

Let it dry fully. If you are using DryDex, wait until it turns completely white. Then move to sanding supplies and smooth the patch with 150 or 220 grit sandpaper. Finish by sealing the patch with a stain blocking primer before your topcoat, because unprimed spackle will flash through paint and you will see a dull spot.

Drywall holes up to two inches

Use a self adhesive mesh patch to bridge the hole first. Apply spackle or patching compound over the mesh with a four to six inch taping knife, feathering the edges out two to three inches beyond the patch itself.

Let the first coat dry, then apply a second thin coat to blend the edges. Sand, prime, then blend the repair back into the wall with a roller matched to your wall's nap (3/8 inch for smooth drywall, 1/2 inch for light texture, 3/4 inch for heavy texture or popcorn).

Pro tip: when you sand spackle, wear a dust mask. Most spackling compounds contain crystalline silica, and even the so-called "low dust" formulas kick up respirable dust during sanding. A cheap N95 is fine for a quick patch. For larger jobs where dust control becomes its own project, our FESTOOL power tools collection carries professional sanders with integrated dust extraction.

Spackle vs Joint Compound: Differences Explained

This is the most common question we get at the counter, so here is the short version.

Spackle is a dense paste made for spot repairs (small holes, cracks, dents). It dries fast, shrinks minimally, and sands easily.

Joint compound (drywall mud) is designed for larger areas like taping seams, skim coating, and covering mesh patches. It dries slower, shrinks more, and is easier to spread thin over a wide surface.

Rule of thumb: if the hole is smaller than your fist, reach for the spackle. If it is bigger, or you are finishing a full drywall install, use a joint compound. You can also layer the two (mud for the bulk, spackle for the final smooth coat), and our patching collection carries both.

Patching Beyond Drywall: Wallpaper, Metal, and Other Surfaces

Most patching jobs are drywall, but the rest of the surfaces in a home need their own approach.

If you are patching wall damage left behind after removing old wallpaper, you will usually find torn drywall paper along with the holes. Skim coat the torn paper with spackle or joint compound, then sand smooth. Our wallpaper tools and primer page carries the sizing primers and removers that make prep work cleaner.

For metal, tile, or concrete patches, standard drywall spackle will not bond properly. You need a surface specific patch or epoxy, which you can find in our spackle & wall patching collection, then checkout the primers and topcoats that pair with each substrate.

Where to Buy Lightweight Spackle Online with Fast Shipping

PaintOutlets ships spackling compound and every product in this collection nationwide to the lower 48 states via UPS, with free local delivery inside our Southeast Michigan service area and curbside pickup at all three stores.

Contractors ordering 48 gallons or more of paint plus supplies qualify for bulk discounts and can have the order drop shipped directly to the job site. Call 248-598-0311 extension 2 for a bulk quote.

Everything on this page ships fast because we keep it in stock. It is not drop shipped from a warehouse three states away. Order by Friday morning and your spackle will be on your project by Monday.

Spackle Frequently Asked Questions

What is a spackle used for?

Spackle is used to fill holes, cracks, dents, and dings in interior walls and ceilings before painting. The most common use is patching nail holes, anchor holes, and small drywall dents so the wall looks smooth once it is repainted. Specialty spackles also work on wood, plaster, and exterior surfaces.

What does spackle mean?

The word "spackle" refers to a ready mixed paste made from gypsum, binders, and fillers that dries hard and sands smooth. It originated as a brand name (Muralo's Spackle, patented in 1928) but has become a generic term used across the paint industry for any lightweight wall repair compound.

What's the best type of spackle for drywall repair?

For small to medium drywall repair, lightweight spackling (such as DAP Fast'N Final or Red Devil OneTime) is the most user-friendly choice. It dries fast, does not shrink, and many formulas require no sanding at all. For larger holes, pair a self adhesive mesh patch with a heavyweight spackle or patching compound for extra strength.

How long does spackle take to dry?

Lightweight spackles typically dry in 30 minutes to 1 hour for shallow fills under one eighth inch. Full cure for deeper fills can take one to five hours, and humidity slows everything down. DAP Fast'N Final is paintable in 30 minutes with latex. DryDex takes one to five hours and turns from pink to white when ready. Always wait until the spackle is fully opaque and hard before sanding.

Can you paint over a spackle without priming?

You can, but it is not recommended for most formulas. The spackle is more porous than the surrounding drywall or paint, so it absorbs topcoat differently and creates a visible dull spot that painters call "flashing." A quick coat of stain blocking primer over the patch eliminates this and gives you a seamless finish. A few products like DAP Fast'N Final are formulated as patch and prime in one step, so they are the exception.

Is spackle the same as joint compound or patching compound?

No, they are related but different. Spackle is for spot repairs. Joint compound is for seams, skim coats, and larger areas. Patching compound sits between the two: denser than spackle, easier to work than joint compound, and ideal for mid size fills. Our collection carries all three types.

Where can I buy a lightweight spackle near me?

If you are in metro Detroit, you can pick up lightweight spackling at our three Michigan stores in Rochester Hills, Shelby Township, and Macomb. For everyone else, we ship to the lower 48 states via UPS. Free local delivery and curbside pickup are available at all three stores.

Chat with a human